| Hardware | |
| CPU | RK3288,4 core ARM-A17,1.8GHz RK3288, quad-core ARM-A17, 1.8GHz |
| Memory | RAM DDR 2GB (4G is optional) |
| Storage | ROM 8GB |
| Operating system | Android 7.1.2 |
| Display | 8-inch liquid crystal display, resolution: 1280*800@60HZ |
| Material | Aluminum alloy |
| Performance | |
| Identification height | 1.2-2.2 meters |
| Identification distance | 0.5-3 meters |
| Body temperature measurement distance | 0.5 meters |
| Identification technology | Support mask identification + infrared array thermal imaging temperature measurement |
| Face angle | 30 degrees left and right, 30 degrees up and down |
| Identification time | 20ms of detection and tracking, and 300ms of feature extraction |
| Status display | Name and temperature broadcast and display, custom information broadcast and display, and three-primary-color status light |
| Main control board interface | |
| EDP output | 1-channel EDP output supports up to 1920X1080 output |
| HDMI output | 1, HDMI2.0 supports up to 4K@60HZ output |
| Network interface | 1 RJ45 10M / 100M adaptive Ethernet port |
| Touch screen interface | 1-channel ETP input |
| Headphone/MIC interface | 1, built-in headphone audio output base (GB: GND,MIC,R,L) |
| WIFI (optional) | 1-channel WIFI signal, support 2.4G/5G WiFi, support Wi-Fi 802.11b/g/n protocol |
| 3G/4G (optional) | Scalable 1-channel 3G (WCDMA, EVDO, CDMA, GSM)/4G (LTE-TDD/LTE-FDD/TD-SCDMA/EDGE/GPRS/GSM) signal |
| SD card interface | Maximum expansion to 64GB TF card |
| USB2.0 interface | 4 USB interface bases (1 external, 3 built-in, 3 HOST USB and 1 OTG USB) |
| Output at the time of connection | 1-channel opening output signal |
| Wiegand interface | 1-channel Wiegand output supports Wiegand 26-bit and 34-bit adaptive transmission |
| Camera parameters | |
| Camera | Binocular MIPI B/W, HDR 2 million pixel camera, automatic exposure, automatic white balance, and automatic backlight optimization |
| Sensor | 1/2.7” industrial-grade binocular high-definition wide-dynamic-range image sensor |
| Frame rate | Maximum 30 frames in black, white and color, no ghosting |
| Infrared light spectrum | 850nm |
| Effective pixels | 1920*1080/1920*1080 |
| Lens | M12(f=3.6MM)/ M12(f=3.6MM) |
| Pixel size | 3.0um X3.0um/3.0um X3.0um |
| Minimum illumination | ≥0.01LUX at F1.2/≥0.1LUX at F1.2 |
| Signal to noise ratio | ≥41dB |
| Wide dynamic range | ≥96dB/≥105dB |
| Interface type | USB2.0 |
| Video coding | H.265 Main Profile coding/H.264 BP/MP/HP coding/MJPEG coding |
| Image resolution | Main stream | 640X480@ 30fps /800X600@ 30fps /1280X720@ 30fps/1280X1024@ 30fps/1920X1080@ 30fps /1600X1200@ 15fps /2048X1536@ 15fps |
| Secondary stream | 640X480@ 30fps /800X600@ 20fps /1280X720@ 5fps/1280X1024@ 5fps/1920X1080@5fps /1600X1200@ 5fps /2048X1536@ 3fps |
| Human temperature measurement parameters | Use the infrared thermal imaging module imported from Germany |
| Temperature measurement range | 30-42℃ |
| Temperature measurement distance | 0.5m |
| Temperature measurement accuracy | ±0.5℃ ideal indoor laboratory environment |
| Card reading parameters (optional for external connection) | |
| Identification card type | Read M1IC card serial number and ID card serial number |
| RF operating frequency | 13.56MHZ |
| Operating effective distance | <3cm |
| Reading rate | 15 times/second |
| General parameters | |
| Working temperature | +20℃ - +35℃ |
| Working humidity | 10-90% relative humidity, no condensation |
| Power supply | DC12V/3A |
| Equipment power consumption | ≦25W |
| Equipment size | 250* 118*18mm |
| Equipment weight | 1.2 kg (depending on configuration) |
